4 Signs Of Poor Attic Insulation And How To Fix It

It’s not uncommon for a home to have poor insulation, especially if it hasn’t been checked out before purchasing the house first. Years can go by in blissful ignorance until certain inconveniences start happening from within, and then it becomes a problem that’s too hard to ignore. But how do you know for sure that it’s the insulation that’s causing it? The experts at Foam Bear Orlando will teach you the most prevalent signs of poor attic insulation and the best ways to fix it!

1. Mold Growth On The Walls

When moisture is introduced into the home, the attic is usually the first point of entry. Since people don’t check their attics often, mold can form on the walls, corners, and crevices and spread at a rapid rate without anyone realizing it until the problem becomes more than just a minor hassle to deal with. This is why it’s a good idea to inspect your attic regularly, but if you’re already seeing signs of mold in your insulation, it might be time to call a professional to remove the mold for you. After that, you should take preventive measures like removing your old insulation and replacing it with spray foam. Closed-cell spray foam has water-repellent qualities that can keep moisture at bay and prevent mold from forming in the future.

2. Condensation In The Window Panes

If you have windows in your attic, take a close look to see if there are any water droplets stuck in between the panes. If you have poor insulation, the humidity from outside is easily transferred inside where moisture can build up where you least expect it which is one of the main causes of condensation. Closed-cell spray foam insulation has the highest R-value, meaning that it’s the best for regulating temperatures and keeping out humidity. First, it’s a good idea to carefully wipe up any condensation you can find and dry up the area before it can damage the property.

3. Consistent Drafts From The Same Location

Poor insulation can leave cracks, making it easy for gusts of wind to travel inside. If you consistently feel a draft coming in from the same spot, you’ll want to take a moment to feel around your attic to see exactly where it’s coming from. You’ll also be able to tell something is off if you notice drastically different temperatures throughout various parts of the house. In this case, open-cell spray foam can help remedy the situation since it expands much larger, up to three times in size. This makes it incredibly useful for sealing all kinds of gaps, even in spots that are normally difficult to reach.

4. Higher-Than-Normal Electric Bills

Very persistent drafts are usually followed by increased charges on your energy bill. If you follow the recommendations regarding spray foam types and proper installation from earlier, this problem will most likely solve itself! Eliminating drafts and inconsistent temperatures will make it easier for your air conditioner to regulate the atmosphere of your home, thus reducing your energy usage by a great amount.

Replace Your Old Insulation With Spray Foam!

If you’re seeing signs of poor attic insulation, call the experts at Foam Bear Orlando! Our team of professionals can remove your old insulation and replace it with high-quality spray foam insulation which will relieve you of all of these problems. Call (727) 580-1090 to ask for a free estimate!